I. Introduction to LED tubes
LED tube is also commonly known as LED light tube, LED fluorescent tube and LED fluorescent lamp. Its light source adopts LED as the light emitting body. The traditional fluorescent tube is also called fluorescent lamp. There is a filament at both ends of the lamp. The lamp tube is filled with a trace of argon and thin mercury vapor. The inner wall of the lamp tube is coated with phosphor. The ga s between the two filaments emits ultraviolet light when conducting electricity, so that the phosphor emits visible light. Because it contains heavy metal pollutant "Mercury", the environmental pollution of scrapped fluorescent tubes is very serious.
LED tubes use LED as light source, which has higher luminous efficiency, more energy saving, longer service life and more environmental protection. It has become an ideal product to replace fluorescent tubes at this stage. LED tubes are the same as traditional fluorescent lamps in terms of external dimensions and caliber, including T5 tubes, T8 tubes and T10 tubes, with lengths of 0.6m, 0.9m, 1.2m, 1.5m, 1.8m and 2.4m.
II. Ten advantages of LED tubes
1. Environmental protection lamps
Traditional fluorescent tubes contain a lot of mercury vapor. If broken mercury vapor will volatilize into the atmosphere and cause pollution. However, the LED tube does not use mercury, and the LED products do not contain harmful substances such as lead. The shell can also be recycled and has no damage to the environment. LED lamps are recognized as green lighting in the 21st century.
2. Less fever
Traditional lamps use tungsten wire to emit light, which will generate a lot of heat energy. However, the light efficiency of LED lamps has reached 140lm / W, the light conversion rate is high, the product surface temperature is below 60 ℃, there is no ultraviolet, and there will be no fading of documents and clothes.
3. No noise
LED lamps will not produce noise, and are the best choice for occasions where fine electronic instruments are used. Suitable for library, office and other occasions.
4. Maintain eyes
The traditional fluorescent lamp uses alternating current, so it will flash 100-120 times per second. The LED lamp adopts LED constant current work, which is to directly convert alternating current into direct current, reduce LED light attenuation, start quickly, no flicker and maintain eyes.
5. No mosquito trouble
LED tubes will not produce ultraviolet, infrared and other radiation, do not contain mercury and other harmful substances, and have less fever. Therefore, there will not be many mosquitoes around the lamp source like traditional lamps. The interior will become more clean, hygienic and regular.
6. Wide voltage scale
The traditional fluorescent lamp is lit by the high voltage released by the rectifier. When the voltage decreases, it cannot be lit. LED lamps can be lit within a certain scale of voltage
7. Long power saving life
The power consumption of LED lamp is less than one-third of that of traditional fluorescent lamp, and the service life is 10 times that of traditional fluorescent lamp. It is basically the same as the brightness of traditional fluorescent lamp. The normal service life is more than 30000 hours, and the power saving is more than 70%. It can be used for a long time without replacement, reducing the labor cost, and is more suitable for occasions that are difficult to replace.
LED fluorescent lamp
8. Consolidation and reliability
The LED lamp body itself uses epoxy resin instead of traditional glass, which is more solid and reliable. Even if it hits the floor, the LED will not be normally damaged and can be used safely.
9. Good universality
The appearance and scale of LED tube are the same as those of traditional fluorescent lamps, which can replace traditional lamps.
10. Rich color
Make full use of the advantage of rich LED color to make lamps of various luminous colors.
Article from: LED fluorescent tube manufacturer http://mushuren.cn/
05-10
LED fluorescent tube manufacturers take you to understand product knowledge
Fluorescent lamp is a straight tube lamp. Traditional fluorescent lamp uses phosphor to emit light, also known as fluorescent tube; Because it is round and tubular, it is also called fluorescent tube
03-11
LED fluorescent tube manufacturers tell you the precautions for LED engineering design
When receiving the LED engineering project, according to the customer' s requirements, the site of the project shall be surveyed, and the local pictures of the device shall be taken to provide th
02-25
What are the advantages of LED fluorescent tubes
First of all, T8LED fluorescent lamps do not use mercury and do not contain lead. Traditional fluorescent lamps contain a lot of mercury vapor. Once such lamps are broken, the mercury vapor will volat
01-18
How to replace the LED fluorescent tube
1. To install a new fluorescent tube, insert the lamp pin into the lamp holder and roll the lamp tube to fix it. If the lamp turns dark, shining or flickering, please replace the lamp. After replaceme