How to remove the LED fluorescent tube
1. Turn off the sunlight power supply. After the gap at both ends of the old fluorescent lamp is rotated 90 degrees, the double needle can be pulled down from the gap and the other end can be pulled out.
2. The old electronic rectifier has no gap and is elastic. Hold the plastic head on the right with your right hand, hold the lamp tube with your left hand and push it to the right for about 1 cm. At this time, the tube needle on the left side of the lamp tube comes out, move down with your left hand and leave the lamp holder, and pull out the lamp tube with your left hand to the front left.
3. If the LED lamp is made of aluminum alloy, there are two cross screws at both ends if you want to disassemble the things inside, which can only be removed with a screwdriver. If you don' t understand the electronic LED tube, don' t disassemble it.
4. Now there are glass LED tubes in the market. This kind is disposable. The two ends are stained with glue. If it is broken, throw it away. It has no repair value. To prevent it from sticking your hand if it can' t be disassembled.
Article from: LED fluorescent tube manufacturer http://mushuren.cn/
-
05-10
LED fluorescent tube manufacturers take you to understand product knowledge
Fluorescent lamp is a straight tube lamp. Traditional fluorescent lamp uses phosphor to emit light, also known as fluorescent tube; Because it is round and tubular, it is also called fluorescent tube
-
03-11
LED fluorescent tube manufacturers tell you the precautions for LED engineering design
When receiving the LED engineering project, according to the customer' s requirements, the site of the project shall be surveyed, and the local pictures of the device shall be taken to provide th
-
02-25
What are the advantages of LED fluorescent tubes
First of all, T8LED fluorescent lamps do not use mercury and do not contain lead. Traditional fluorescent lamps contain a lot of mercury vapor. Once such lamps are broken, the mercury vapor will volat
-
01-18
How to replace the LED fluorescent tube
1. To install a new fluorescent tube, insert the lamp pin into the lamp holder and roll the lamp tube to fix it. If the lamp turns dark, shining or flickering, please replace the lamp. After replaceme