How to repair the broken LED fluorescent tube
Now the interior decoration planning pays attention to harmony and beauty, and the requirements for the selection of lamps are higher and higher. As an indoor lighting thing, the role of lamps and lanterns is becoming more and more important, but lamps and lanterns often have quality problems. How to replace lamps and lanterns? The following small series tells you the precautions for lamp replacement!
I. replace led ceiling lamp: when replacing led ceiling lamp, take off the original rectifier and replace it with a new one. Since the rectifier and LED lamp wick are integrated, it is OK to fix the wick on the chassis.
II. Replacing incandescent lamps: when replacing incandescent lamps, do not touch the metal part at the bottom of the bulb in the process of removing the bulb, so as to prevent danger. When replacing the bulb, grasp the part close to the lamp mouth by hand to avoid accidents during disassembly.
III. replacement of Spotlight: there is a spring clip behind the ceiling spotlight. When it is removed, you should buckle the two ends of the lampshade with your hand and pull it down quietly. Keep your hand on the spring all the time, and release the spring after disassembly to be careful of injury. Just connect the driver and lamp in the white square box with a black clip, and then pull out the black clip.
Article from: LED fluorescent tube manufacturer http://mushuren.cn/
-
05-10
LED fluorescent tube manufacturers take you to understand product knowledge
Fluorescent lamp is a straight tube lamp. Traditional fluorescent lamp uses phosphor to emit light, also known as fluorescent tube; Because it is round and tubular, it is also called fluorescent tube
-
03-11
LED fluorescent tube manufacturers tell you the precautions for LED engineering design
When receiving the LED engineering project, according to the customer' s requirements, the site of the project shall be surveyed, and the local pictures of the device shall be taken to provide th
-
02-25
What are the advantages of LED fluorescent tubes
First of all, T8LED fluorescent lamps do not use mercury and do not contain lead. Traditional fluorescent lamps contain a lot of mercury vapor. Once such lamps are broken, the mercury vapor will volat
-
01-18
How to replace the LED fluorescent tube
1. To install a new fluorescent tube, insert the lamp pin into the lamp holder and roll the lamp tube to fix it. If the lamp turns dark, shining or flickering, please replace the lamp. After replaceme